CBE Study Tip 12: CBP Directives

For many years, the Customs Brokers Exam only required the use of the HTSUS and the CBP Regulations; however, in 2004, CBP expanded its scope of materials to include Customs Directives and other reference materials. These materials are important because they provide guidance on activities brokers perform that aren’t included in the regulations. Since their addition, these resources have comprised 8% to 10% of the total questions on the exam. Because of the number of resources, it’s difficult to predict specific areas for testing. The best thing to do is to study all of it. We’ve provided the key highlights for the four most frequently tested supplemental resources.

1. Instructions for Preparation of CBP Form 7501

Although most entry summaries are completed electronically, it’s important to have a good understanding of the information contained in this document. By reading these instructions, you can complete a CBP 7501 by hand without the assistance of a computer. You should keep this document handy and review all blocks because it has been one of the most frequently tested supplemental resources since the implementation of the new CBP 7501 format in September 2005. Become very familiar with each block number, so you can easily reference it. Block 2 (Entry Type Code) and Block 31 (Net Quantity) are easy targets!



2. CD 3510-004 - Monetary Guidelines for Setting Bond Amounts

The purpose of the bond is to protect the revenue and ensure compliance. The amount of a bond is calculated using information on the bond application, the criteria in Part 113 of the CBP Regulations and the guidelines in this directive. This directive provides standardized guidelines for computing the bond amounts for all types of bonds. For the exam, it’s important to know how to calculate single entry and continuous bonds.

The first type of bond is the Activity 1, Importer or Broker Continuous Bond. The minimum amount of a bond in this category is $50,000.

For importers paying zero to $1,000,000 in duties and taxes, the bond should be computed as 10% of the duties and taxes paid for the previous calendar year and issued in increments of $10,000.

For importers paying over $1,000,000 in duties and taxes, the bond should be computed as 10% of the duties and taxes paid for the previous calendar year and issued in $100,000 increments.

The next type of bond is the Activity 1, Importer or Broker Single Transaction Bond. This bond is valid for one shipment and is computed in an amount not less than the total entered value of the merchandise plus all duties, taxes and fees, unless the merchandise falls into a special category. If the merchandise is subject to other government agency requirements such as the FDA or FCC, the bond will be computed in an amount of at least three times the total entered value of the shipment. In addition, the district director may set the single transaction bond amount at 10 percent of the total entered value for unconditionally free merchandise, which is not subject to the previously mentioned categories.

Note:
Not all of the government agencies are included in the list that requires a bond in the amount of three times the value of the shipment. If your goods are not regulated by one of the government agencies on the list, then the single entry bond will be written for value plus duty.




3. CD 3550-055 - Instructions for Deriving Manufacturer/Shipper Identification

Questions involving the manufacturer’s identification code “MID” should be some of the easiest to answer. Not only does this directive provide instructions on how to construct the code, but the information is also included in the CBP Form 7501 Instructions. Just memorize the rules for deriving the MID.

This code is commonly referred to as the MID or Manufacturer Identification Code. This technique is also known as keylining. On the broker’s exam from October 2005, a question required knowledge of the term keylining.

Customs requires the formation of a code from the name and address of the manufacturer.
The MID contains five components that are added together without spaces to create the code. The code can be up to 15 characters in length. The five components consist of the following information:


· Two letter abbreviation for the country of origin
· First three letters of the first name of the manufacturer
· First three letters of the second name of the manufacturer
· First four digits of the street address, and
· First three letters of the city name.

There are some general rules to consider.

· Ignore all punctuation
· Ignore single character initials. and
· Ignore the words “a”, “an”, “and’, “of”, and “the”.



4. 3550-067 - Entry Summary Acceptance and Rejection

Customs Directive 3550-067 provides guidelines for uniform acceptance and rejection of entry summaries. Five major areas of interest in this directive include the following:

· Collections Processing – Rejections
· Acceptance Review and Summary Processing
· Processing of Rejected Entry Summaries
· Time Limit
· Rejection Effect on Entry Summary Filing Time

This information is a little more complicated to grasp, so read each of the major areas and highlight key information.


Although we didn’t cover all of the directives and supplemental materials, they are not any less important. Remember the advice from the beginning of the article - the best thing to do is to study all of it.

We welcome your comments on these suggestions and encourage you to add your own ideas to this forum so that other students studying for the exam can benefit from your experiences. Check the Boskage Trade News regularly to find more useful news for international trade professionals! As soon as the Wizard obtains a copy of the test and has time to work out some preliminary answers, we’ll post them here for your review and comments.

CBE Study Tip 11: Free Trade Agreements

With the increase of free trade agreements between the U.S. and other countries, the number of questions on the CBE related to these agreements has increased. In fact, “Trade Agreements” often has its very own section of questions on the exam. Free Trade Agreements (FTAs) are international agreements made between two or more nations that relate to common trade or service issues. FTA’s reduce or eliminate all tariffs and other restrictions on substantially all the trade in goods between its member countries based on country of origin.

The information needed to answer questions about FTA’s is likely to be found in one of four places, the General Notes of the HTSUS, Chapters 98 an 99 of the HTSUS, 19 CFR Part 10 and 19 CFR Part 181. Memorize the titles of these General Notes and skim the text to become familiar with the topics covered in each. In your review of the programs, concentrate on the basic requirements such as tariff shift, de minimis and RVC requirements. Each program has different requirements regarding allowance of the special duty treatment, and some of these programs are subject to change. Most of these programs have very detailed requirements that must be met in order to claim the duty-free status. Additionally, these programs are often difficult to understand, and some have limited use in daily practice. Try not to be too overwhelmed when encountering these problems. If they appear too difficult, move and come back to them later.

Don’t overlook important terminology. Be sure to know the definitions for each of the following:

· Accumulation
· Direct Cost of Processing
· De Minimis
· Imported Directly
· Transshipment
· Regional Value Content RVC
· Tariff Shift
· Substantial Transformation

To view a list of the FTAs, the references to the HTSUS General Notes, SPI and CFR references, click HERE.

We welcome your comments on these suggestions and encourage you to add your own ideas to this forum so that other students studying for the exam can benefit from your experiences. Check the Boskage Trade News regularly for more helpful hints on studying for the Customs Broker Exam and other useful news for international trade professionals!

CBE Study Tip 9: How to Use the HTSUS - Part 2

Classification is a skill that takes time to develop, but the more effort put into the process, the faster one will become more proficient. The actual process of classification is very complex, almost like reading a foreign language. It is important for both experienced and beginner to understand that the strategy for answering classification questions on the brokers exam is a little different from the process used for classifying goods for your companies on a daily basis. The basic steps discussed are similar to those used in daily transactions, but there is more to the process for those classifying goods on a regular basis. On the exam, you won’t be able to consult with experts or use the Cross Rulings Database. Remember, the average time allotted per question on the exam is three (3) minutes. In actual practice, you would likely spend more than three minutes trying to classify a product. The primary difference between classification on the exam and classification in a business situation is that the exam provides five (5) possible answers, and you know that one of those answers is correct. In real life, you aren’t provided with a set of answers in which you know for certain one is correct. Another difference is that classification questions found on the exam are intentionally complicated and sometimes tricky. Thus, there is a need for a slightly different strategy for answering the questions on the exam.

1. Read the question carefully and make note of the details.
The first step in answering any classification question involves a careful, thorough reading of the question and making note of the details provided. Some of the details may be critical to answering the question correctly. Remember, exam questions have been carefully worded and may be tricky, so some of the details may be not be necessary. You may want to highlight the details as you read the question.

2. Look up each answer and eliminate those that are clearly incorrect.
The second step for answering classification questions is to look up all the answer selections and eliminate those that are clearly incorrect. This process may be more difficult than it sounds. Classification questions are typically written in such a way that all or most of the answers appear to be correct. The best way to answer them is by a process of elimination. Consider the following example.

What is the classification of a woven nylon scarf measuring 55 cm x 50 cm?

A. 6214.30.0000
B. 6214.40.0000
C. 6213.90.1000
D. 6117.10.2030
E. 6117.10.6020

Notice that the answers are found in two different chapters, so it is likely that we will be able to eliminate one of the chapters. Indeed, we can eliminate Answers D and E easily because Chapter 61 covers knit articles and our scarf is woven.

3. Read Chapter and Section Notes
The third step is to review the Section and Chapter Notes to make sure that there is not any information there that would preclude one or more answers. Section and Chapter Notes provide valuable information about what items are specifically included and excluded as well as useful definitions. Because of the time constraints, it would be easy to skip the Notes; therefore, the writers of the Exam intentionally include questions that require the applicant’s ability to use the Notes. Remember, the Notes can be long and many of them will not be related to the classification you are checking. You must learn to scan the notes for significant headings and keywords. If you still have several potential answers at this stage, the Notes may help you make a determination between them. You should do this even if you only have one answer remaining after the elimination step. If you have eliminated all answers but one when you reach this step and find a Note that eliminates that answer, you will have to start over to find the answer you have eliminated incorrectly. Let’s go back to the scarf.

Answer B should be eliminated because the provision is for artificial fibers and our scarf is nylon, which is a synthetic fiber. If you did not know whether nylon was artificial or synthetic, Chapter 54 and 55 covering man-made fibers would help. It would appear that Answer A is the correct selection for our scarf; however, Chapter 62 Note 7 explains that scarves that measure less than 60 cm should be classified as handkerchiefs under 6213. This is a prime example of the importance of reading the Notes. If we had overlooked the Notes assuming that 6214.30.0000 specifically describing our product was correct, we would have answered the question incorrectly.


In most situations, you will be able to answer questions using these steps; however, there may be a few questions that require an additional step involving the application of the General Notes and/or GRI. For example, a question may require you to select the appropriate duty rate. Once you’ve located the appropriate HTS number, you will select a duty rate based on the country of origin. Given the origin, you may need to check the General Notes to determine if the country is included or excluded from certain free trade agreements.

Now that you are familiar with the organization of the HTSUS and have some tips on how to answer classification questions, it’s time to practice these skills. One of the best ways to practice for the exam is to take past exams. Old exams can be found on CBP’s website. For detailed instruction on classification and related topics, check out our online courses at bcpLearning.com.

Stay tuned to the Boskage Trade News for more helpful hints on studying for the Customs Broker Exam! The next article will cover “Valuation.” We also welcome any suggestions on topics you would like to see discussed.